Faq Sections

Anti-dirt-repellent mats are the first line of defense in keeping dirt and debris out of buildings. They improve air quality, reduce noise resonance, extend floor life and cut maintenance costs.

Dirt-repellent mats also facilitate access for people with reduced mobility, while ensuring the safety of all users (avoiding falls, slips, etc.). But they also contribute to the cleanliness and hygiene of your premises, while enhancing your image, since the entrance is the first impression your customers will have of your establishment.

To cut a long story short, a dirt-repellent mat must meet 3 main criteria:

• attractive design
• resistance to traffic
• excellent functionality

When choosing an antisoiling mat, there are a few criteria to consider:

Your environment:

• Humid environment: you should opt for an absorbent or non-slip anti-fouling mat to prevent moisture from penetrating your premises.
• Dry environment: you should opt for a scraping mat that will catch all the debris and dust found under the soles of your customers' shoes.

Type of traffic :

• Up to 250 passages/day: standard traffic mats .
• Up to 500 passages/day: heavy traffic mats.
• Over 500 passages/day: very heavy traffic mats.

There are 3 ranges of dirt-repellent mats:

• Scraping mats : Scraper mats have dry, hard fibers for effective scraping of shoe soles. Used in dry, dusty environments.

• Absorbent mats: Absorbent mats absorb moisture brought in by passers-by. Depending on the mat, they can absorb 3 to 6 L of water per m2, and are known as water-barrier mats.

• Non-slip mats: Anti-slip mats also have a scraping function, preventing dirt from entering the premises. However, they have one more function than scraping mats: they have anti-slip properties. These mats are most often used outdoors.

Retains virtually all dirt thanks to an ingenious combination of technical entrance mats mounted on aluminum profiles and cleanliness coatings.

Ideal for the heaviest traffic, over 1,000 passages per day, and withstands caddies, carts, baby carriages and suitcase wheels.... Reduces the risk of slipping on wet floors and the cost of cleaning your entrance. Suitable for high-end building entrances that require a bright mat without loss of quality.

Aluminum mats are used when an entrance is used by more than 1,000 pedestrians or wheeled loads per day. When the reception area is divided into 3 zones (outside, inside entrance, inside building)

When choosing an aluminum mat, there are a few criteria to take into account:

• Profile height: the higher the profile, the greater its dirt-holding capacity.

• Profile types: the thicker the profile cross-section, the more resistant the mat will be to rolling loads.

• Coatings: (reps, rubber or brush): The place of installation, the environment and the type of soiling determine the type of covering.

(Reps ensures dirt pick-up and moisture absorption. Rubber and brushes only capture dirt).

Grating is a square slab of metal, polyester, rubber or PVC, made up of several parallel slats. The slats come in a variety of sizes, species and colors, and are grooved to prevent water from stagnating and the floor from becoming slippery.

• Polyester grating: 65% resin for chemical and UV resistance, 35% fiberglass for high mechanical strength. Molded in panel form, it guarantees excellent resistance to varying degrees of corrosion and chemical aggression.

• Rubber gratings: All our rubber products comply with the Reach regulations adopted to better protect human health and the environment against the risks associated with chemical substances. They are water and UV resistant, anti-slip, anti-fatigue, environmentally friendly, biodegradable and recyclable.

• Hygienic grating: Made from moisture- and UV-resistant PVC, hygienic grating prevents the spread of bacteria and keeps wet environments clean while protecting users.

• Metal grating: commonly used for technical walkways and stair treads, but also in the building industry for facade elements, fencing and railing infill.

Polyester gratings: Food industry - Paper and cellulose industry - Pharmaceutical industry - Plastics industry - Fiber and textile industry - Automotive and aircraft construction - Offshore installation - Sewage treatment plant - Navy and shipbuilding - Transport - Pickling and galvanizing plant.

Rubber gratings: Can be used in a wide range of applications: building entrances, walkways, stairs, access paths, production lines, ski resorts, etc.

Hygienic gratings: swimming pools - changing rooms - saunas - hotels - kitchens - steam rooms, etc.

Metal gratings: Thermal, hydroelectric, nuclear and solar power plants - Chemical and oil industries - Automotive and steel industries - Shipbuilding - Cement works - Metal processing and construction - Railways and transport